How much resin does a 3D print use? How to estimate it before you print
How much resin does a 3D print use? How to get your slicer's estimate in mL before you print, and why a real print uses more than that.
How much resin does a 3D print use? It depends on the size of the parts, whether they are hollow and how much support they need, so the answer comes from your own files. Your slicer gives you an estimate in millilitres (mL) once the parts are set up the way you will print them. A real print uses more than that.
The kit posts on this site don't estimate resin. I'll add my own figures when I slice a kit's files and print it for a review.
How to get the estimate from your slicer
The slicer counts everything it will print: the parts, their supports and the raft. It counts a hollowed part as the shell that is left. So the estimate is only as good as your setup:
- Set up each part the way you will print it, hollowed where you will hollow it and supported the way you will support it.
- Include every part of the build you will print, base included, and leave out alternate parts you won't print.
- If the parts need more than one build plate, add up the estimates for each plate.
A raw STL file is usually solid, with no supports, so its estimate changes once you hollow and support it. A studio's presupported file comes with the studio's supports, and the studio may have hollowed it. Presupported vs unsupported STL files covers that choice.
I slice in Lychee Slicer on a Mac. It shows the resin volume in mL and a cost estimate for the scene. Lychee's documentation covers setting up and slicing a scene.
CHITUBOX documents its estimate. After slicing, its estimation panel lists the volume, weight, cost and estimated print time (CHITUBOX Docs). It can estimate the cost once you give it your resin's density and price (CHITUBOX Docs). Your resin's density is on its technical data sheet or safety data sheet.
Why a real print uses more
The estimate counts the resin that cures into the print. Some of the resin a print job takes from the bottle never gets that far:
- It coats the build plate and the prints, and washes off when you clean them.
- It clings to the vat after you pour the rest back.
- It stays trapped inside a hollow part that doesn't drain. Drain holes are there to let it out (Lychee Documentation).
- It goes into a print that fails.
CHITUBOX calls its own estimate "a theoretic value" and names resin left on the build plate or the model as one reason (CHITUBOX Docs).
How much more depends on the print and your setup. AmeraLabs, a resin maker, weighed one print job of six small miniatures and their bases. CHITUBOX estimated 42.5 g, and the job took 78.7 g from the bottle (AmeraLabs). That was one job, on a different printer and resin from mine, and AmeraLabs says no single multiplier works for every setup.
So pour more than the estimate when you fill the vat. To learn your own gap, weigh what your print jobs take on a kitchen scale. AmeraLabs' article explains how, and suggests measuring three to five jobs to get a reliable baseline. Wear nitrile gloves and eye protection whenever you pour resin; resin printing safety has the full rules.
Watch and read next
Videos
- Lychee — Learn Lychee Slicer in 30 minutes | Beginner Full Tutorial A half-hour beginner's walk through the slicer, from Lychee's own channel.
- Gray Scalp Miniatures — 1KG Bottle of Resin: How much is wasted? A look at how much of a 1 kg bottle goes to waste.
- Uncle Jessy — How much can you print with 1 bottle of resin? | Elegoo Saturn / Elegoo Mars 2 Pro One bottle of resin, and how much it prints.
Reading
- How Much Resin is Lost During Resin 3D Printing? We Measured It — AmeraLabs. The full weigh-in, stage by stage, with the method for your own baseline.